Troubleshooting Cardiograph Issues Troubleshooting
PageWriter TC 70 Cardiograph Service Manual 3-17
Password is missing.
Please re-enter your
password before
continuing.
message
The Configuration
screen is password
protected and you did
not enter a password.
Enter the correct password to gain access to the
configuration screens.
Password is not
confirmed. Confirm
your password
before proceeding
.
message
You enabled the
Configuration password
but did not confirm it.
Confirm the configuration password after entering it.
The maximum
number of fax
profiles has been
configured. Please
edit or delete an
existing fax profile.
message
There is a current
system limitation of one
fax profile.
Edit or delete an existing fax profile.
Please select a
TraceMaster server
as the default
connection
message
You attempted to set a
default TraceMasterVue
server without first
selecting it.
You must first select a TraceMaster server before it can
be set as the default.
The cardiograph
must restart in
order to display
simulated waveform
data
message
The cardiograph’s
simulation mode was
turned on and the device
must be restarted to
display simulated
waveform data.
Touch
OK to restart the cardiograph.
The cardiograph
must restart in
order to return to
normal operating
mode
message
The cardiograph’s
simulation mode was
turned off and the
device must be restarted
to return to normal
operation mode.
Touch
OK to restart the cardiograph.
Unsaved changes
will be deleted. Do
you want to
continue and
discard changes?
message
After making a
configuration change,
you touched the Exit
button without saving
the change.
Save any configuration changes before exiting the
configuration screens.
Table 3-6 Configuration Screen Issues (continued)
Symptom Possible Cause &
Investigation Step
Solution
To Next Page
Loading...