74
5277A
0912 The controller board cannot process the called service. The service
is protected. It can only be enabled with a password.
Enable the service before calling it, or use a ser-
vice which is not protected.
0913 The controller board cannot process the called service, as it is not
supported.
Use a service supported for this controller board.
0918 An unknown service code was called. The service code is not sup-
ported for this controller board.
0919 The service exceeds the maximum permissible mailbox size. The
service is longer than 1024 bytes.
Use only services which are no longer than 1024
bytes including all parameters. Call the service
more than once to transmit the data set in multi-
ple steps.
091A An unknown value was entered for the Action_Index parameter.
091B A value already used elsewhere was entered for the Action_Index parameter.
0920 A value already used elsewhere was entered for the Signal_Index parameter.
0925 An undefined value was entered for the Event_Index parameter.
0926 A value already used elsewhere was entered for the Event_Index parameter.
0928 The controller board cannot process the called service, as this ser-
vice can only be used exclusively.
Change the assignment of the right with the
Change_Exclusive_Rights_Request (0956
hex
)
or use a non-exclusive service.
Display Description Remedy
To Next Page
Loading...
Need help?
General
