Phoenix Contact IBS ABB DSC-T User Manual

79
5277A
0A06 The controller board could not carry out the access.
0A07 The controller board could not carry out the access. The object does not exist.
0A08 The service called conflicts with another service. Wait for the processing of the service called first,
then try again.
0A10 The controller board could not process the Set_Value_Request (0750
hex
) service, as a wrong value was entered for
the Variable_ID parameter.
0A11 The controller board could not process the Set_Value_Request
(0750
hex
) service, as the permissible value range was exceeded
when specifiying a parameter.
Check the parameters of this service.
0A12 The value range of the Device_Level parameter was exceeded. Check the Device_Level parameter. Values from
00
hex
to 0F
hex
are permitted.
0A14 An invalid value was entered for the Error_Char_Flag parameter. Check the Error_Char_Flag parameter. Values
from 0000
hex
to 0001
hex
are permitted.
0A15 An invalid value was entered for the Position parameter. Check the Position parameter. Values from
00
hex
to 3F
hex
are permitted.
.
0A16 An invalid value was entered for the INTERBUS device number
(segment/position).
Check the devices. For the segment, values
from 01
hex
to FF
hex
are permitted, for the posi-
tion, from 00
hex
to 3F
hex
.
Display Description Remedy

Phoenix Contact IBS ABB DSC-T Specifications

General

Brand	Phoenix Contact
Model	IBS ABB DSC-T
Category	Controller
Language	English