Chapter. 3 Recording
3.1. Image Initialization (Calibration)
3.2. Selecting the Frame Rate
3.3. Selecting the Resolution
3.4. Selecting the Shutter Speed
3.5. Dual Slope Shutter
3.6. AUTO EXPOSURE Operation
3.7. Image Trigger
3.8. Selecting the Trigger Mode
3.9. LOW LIGHT Mode
3.10. VARIABLE Setting
3.11. White Balance Adjustment (Color Models Only)
3.12. Color Enhancement Function (Color Models Only)
3.13. Look-Up Table (LUT) Operations
3.14. Edge Enhancement Function
3.15. Partition Memory & Record
3.16. Simultaneous Replay/Record Function
3.17. Input / Output Signal Types
3.18. Using External Triggers
3.19. Using External Synchronization Signals
3.20. GENERAL Signal Settings
23 FASTCAM SA-Z Hardware Manual