Chapter. 3 Recording
3.13.1. Using a Custom LUT
Creating a LUT pattern is done with PFV.
•
For the creation method of a LUT pattern, refer to “Photron FASTCAM Viewer User's Manual”.
3.14. Edge Enhancement Function
With the system's edge enhancement setting, you can enhance the edges in the recorded image in
four steps, including the OFF setting.
Edge enhancement set to weak.
Edge enhancement set to medium.
Edge enhancement set to strong.
3.15. Partition Memory & Record
The system contains internally 8 GB standard, or a maximum of 64 GB, of high-capacity memory for
recording use.
This recording memory can be partitioned and assigned to each recording. Memory is partitioned
into equal sizes and a maximum of 64 partitions can be set. The partitioned sections are managed
by ID numbers.
Each section can be set with completely independent recording conditions, so this feature is
convenient when taking consecutive recordings with changed conditions.
48
To Next Page
Loading...
Need help?
General
