Chapter. 3 Recording
3.19.3. Synchronization with a variable frequency
When synchronizing with a varying input frequency signal, the frame rate and resolution specified
before recording will be kept as a maximum value, and the camera frequency can alternate to a
minimum of about 60Hz(50Hz) following to the input signal, even under the recording mode.
•
The camera runs as 48Hz when external sync signal is not inputted.
•
When an input sync signal is variable, the output image quality might be worse.
•
If this phenomenon happens, the image quality can be recovered by reducing about 16 to 40 pixels
of vertical resolution.
56
To Next Page
Loading...
Need help?
General
