English
30
Function Action Display
Input startup time for
1st operating cycle.
Press SELECT MENU to set the startup time,
a
dvancing in ten-minute jumps (for example, you
want the stove to start up at 06:00). Confirm by
pressing the SET key.
Set shutdown time
for 1st operating
cycle.
Press SELECT MENU to set the shutdown time,
advancing in ten-minute jumps (for example, you
want the stove to shut down at 09:00). Confirm by
pressing the SET key.
In this stage a shutdown time need not be set.
Press SELECT MENU , set the readout oFF and
confirm by pressing the SET key.
Set desired power for
first operating cycle.
Press SELECT MENU to set the desired power
(for example you want power setting 1). Confirm
by pressing the SET key.
Set room
temperature for first
operating cycle.
Press SELECT MENU to set the desired room
temperature (for example, you want a room
temperature of 25°C). Confirm by pressing the
SET key. When the desired temperature has been
reached the stove automatically reverts to power
setting P1 and the temperature can be read on the
remote or on the stove - see Multicomfort menu.
Set desired
Multifuoco fan speed
for first operating
cycle.
Press SELECT MENU to set the desired fan
speed (for example, you want fan speed setting 1).
Confirm by pressing the SET key. Confirm by
pressing the SET key. When programming the
timer on the P960-P960F-P961 stove it is not
possible to set separate fan speeds.
After having programmed the first operating cycle you may, if you wish,
proceed with programming the second operating cycle by going through
the settings in the order as described above. The number 2 appears on
the display to indicate the second operating cycle.
START D
PROGRAM 1
To Next Page
Loading...
