English
33
Function Action Display
Enable or disable
w
eekend programme
P
ress the SELECT MENU key and select on to
enable the weekend programme or oFF to disable
t
he weekend programme. Confirm by pressing the
SET key. If you have disabled the programme by
s
electing oFF and do not wish to carry out further
programming, press the ESC key to return to the
previous menu or the MENU key to return to the
initial display.
Set startup time for
1st operating cycle.
Press SELECT MENU to set the startup time,
advancing in ten-minute jumps (for example, you
want to stove to start up at 06:00). Confirm by
pressing the SET key.
Set shutdown time
for 1st operating
cycle.
Press SELECT MENU to set the shutdown time,
advancing in ten-minute jumps (for example, you
want to stove to shut down at 09:00). Confirm by
pressing the SET key.
In this stage a shutdown time need not be set.
Press SELECT MENU , set the readout oFF and
confirm by pressing the SET key.
Activate or
deactivate the first
operating cycle on
Friday, Saturday and
Sunday.
Press the top part of the SELECT MENU key to
select the day of the week, then press the bottom
part of the SELECT MENU key to select on to
activate the first operating cycle on the chosen
day or oFF to deactivate the first operating cycle
on the chosen day. Do this for Friday, Saturday and
Sunday (active days will be shown on the DAYS OF
THE WEEK display) and confirm by pressing the
SET key.
Set desired power for
first operating cycle.
Press SELECT MENU to set the desired power
(for example you want power setting 1). Confirm
by pressing the SET key.
Set room
temperature for first
operating cycle.
Press SELECT MENU to set the desired room
temperature (for example, you want a room
temperature of 25°C). Confirm by pressing the
SET key. When the desired temperature has been
reached the stove automatically reverts to power
setting P1 and the temperature can be read on the
remote or on the stove - see Multicomfort menu.
To Next Page
Loading...
