Piazzetta P950 - Thermal cutout ALC stove status (Hopper thermostat); Thermal cutout ALC stove status (Stove structure thermostat); NO ACC stove status

English
46
PROBLEM CAUSE SOLUTION
Thermal cutout
"
AALLCC
" stove status
(Hopper thermostat)
Blocked flue
Check and clean the flue
Grate requires cleaning
Clean the grate (see section 7.1)
Faulty thermostat
Replace hopper thermostat (use only
original spares)
Badly positioned manual reset
thermostats
Check that the thermostat sensor is
correctly positioned
Faulty electronic board
Replace the electronic board (use only
original spares)
Faulty fan
Check fan operation and replace if
necessary (use only original spares)
Temporary power failure during
operation
Manually reset the pressure switches (see “ ALC ”)
With reference to standard EN 60335-1, a Piazzetta
After-Sales Service Centre or an authorised person
must be contacted after two resets.
Thermal cutout
"
AALLCC
" stove status
(Stove structure thermostat)
Blocked flue or flue gas outlet
Check and clean the flue and the outlet
Faulty thermostat
Replace the thermostat (use only
original spares)
Badly positioned thermostat
Check that the thermostat sensor is
correctly positioned
Faulty electronic board
Replace the electronic board (use only
original spares)
Temporary power failure during
operation
Manually reset the pressure switches (see “ ALC ”)
With reference to standard EN 60335-1, a Piazzetta
After-Sales Service Centre or an authorised person
must be contacted after two resets.
Faulty fan
Check fan operation and replace if
necessary (use only original spares)
"
NNoo AACCCC
" stove status
Empty hopper
Fill the hopper
Grate requires cleaning
Clean the grate (see section 7.1)
Operating temperature not reached
Empty the grate and restart
Faulty glow plug (igniter)
Replace glow plug (use only original
spares)
Faulty electronic board
Replace the electronic board (use only
original spares)