Installation
Operating Manual PSENmlock mini, PSEN mlm 1 sa 1.1/2.1/2.2
1005802-EN-02-Draft
| 46
Fig.: External attachment parallel to the rotational axis
Legend
[R] Gate radius R
[X] X-dimension
[G] Handle
Factors that positively influence the smooth insertion of the actuator into the safety switch:
} Small X-dimension
} Large gate radius R
} Little play in the gate bearing
} Gate sags very little
INFORMATION
The insertion of the actuator into the safety switch is influenced by the
above factors. For this reason we recommend you use 3D data to inspect
the installation situation, see www.pilz.com.
To Next Page
Loading...
