TARGA 3000 Configuration Cookbook
11/25/2002
26
4.14 IBM Intellistation MPro 6229-37U
IBM Intellistation M-Pro
6229-37U
Intellistation M-Pro 6229 Homepage
PERFORMANCE RATING: 2 streams YUV
TESTED CONFIGURATION:
+1 x 2.4 GHz Intel Pentium 4 Processor
+1 18.2 Ultra 160 SCSI Hard Drive
+512 MB PC800 ECC RDRAM Rambus
Memory
+NVIDIA Quadro4 900XGL AGP 4x Display
Adapter
+Adaptec 29160/39160 or ATTO UL3D
SCSI 160 Controller
+Medea Raid RTR 160 Disk Array
+Rorke Galaxy-i Disk Array
+ Adobe Premiere v6.02 & v6.5
+ TARGA 3000 (rev. 3108)
+ TARGA 3000 v1.5 and v1.5.1 drivers
+ Windows XP
SLOT ASSIGNMENTS:
AGP: NVIDIA Quadro4
PCI32-1: Empty
PCI32-2: Empty
PCI32-3: Empty
PC132-4: Targa 3000 (Rev. 3108)
PC132-5: Adaptec 29160/39160 or ATTO
UL3D SCSI 160 Controller
FEATURES AND SPECIFICATIONS:
Form Factor: Mini Tower (18.5 inches H x 6.5
inches W x 20 inches D), 42 lbs.
Supported Processors:
Supports single Intel® Pentium4 processor
Planar clock speed: 533 MHz
Memory Type:
PC800 Rambus RDRAM Memory Expandable to 2
GB
I/O Expansion Slots:
1 AGP slot
5 PCI 32 Bit Slots
Integrated Devices:
10/100 Integrated Ethernet w/Wake on LAN
CONFIGURATION NOTES:
1. Highly recommend reinstalling Intel’s
INF installer (
qi6z24us.exe ) for fully
functional system.
2. If using the Adaptec 39160 SCSI card,
recommend installing the latest ASPI
drivers (v4.72) from www.adaptec.com
3. If using the ATTO UL3D U160 SCSI
Card, recommend installing the latest
v1.66 firmware drivers from
www.attotech.com
.
4. Recommend using NVidia’s latest
video card drivers (www.nvidia.com
)
for W2K or XP.