TARGA 3000 Configuration Cookbook
11/25/2002
27
4 Certified Motherboards
4.1 Intel SE440BX-2 "Seattle" Motherboard
Seattle Product Site
Note: Intel 440BX chipset 32-bit PCI solution
Tested Configuration
- BIOS version 4S4EB2X0.86A.0023.P16
- Board version N/A
+ One Pentium III 550MHz 100 Mhz FSB
+ 256 MB PC-100 SDRAM
+ ATI Rage 128 Pro PCI 16MB display adapter
+ Adaptec 29160 SCSI host adapter BIOS v2.55.0
+ 3Com905C-TX network interface card
+ Seven Quantum Atlas 10K 9WLS Ultra160m 9 GB
drives
BIOS Settings
From Setup defaults, disable Power Management.
Performance Rating
2 streams YUV uncompressed
Slot Positions
AGP: ATI or Matrox display adapter
PCI 1: empty
PCI 2: TARGA 3000
PCI 3: SCSI adapter
PCI 4: 3Com905 NIC
ISA 1: empty
ISA 2: empty
Technical Advisories
1. PCILOCK Boot Option
Specifications and Features
The SE440BX-2 motherboard has the following
features:
- ATX form factor of 12 x 7.75 inches
Microprocessor
- Single Pentium(r) III processor, - Pentium(r) II
processor or Intel(r) - Celeron(tm) processor
- 66 MHz and 100 MHz host bus speeds
- Integrated 512 KB second-level cache on the
Pentium III processor and Pentium II processor
- Integrated 128 KB second-level cache on the Intel
Celeron processors 300A MHz, 333 MHz, 366 MHz,
400 MHz, and 433 MHz
- 242-contact slot connector
Main Memory
- Three 168-pin dual inline memory module (DIMM)
sockets
- Supports up to 768 MB of synchronous DRAM
(SDRAM)
- Supports error checking and correcting (ECC)
Intel 82440BX AGPset and PCI/IDE Interface
- Intel 82443BX PCI/AGP controller (PAC)
-- Integrated PCI bus mastering controller
-- Integrated Accelerated Graphics Port (AGP)
controller
- Intel 82371EB PCI ISA IDE Xcelerator (PIIX4E)
-- Multifunction PCI-to-ISA bridge
-- Universal Serial Bus (USB) and DMA controllers
-- Two fast IDE interfaces, that support up to four
IDE drives or devices
Power management logic
-- Real-time clock
Five Expansion Slots
- One ISA slot
- Three 32-bit PCI slots
- One shared PCI/ISA slot
To Next Page
Loading...
Need help?
General
