TARGA 3000 Configuration Cookbook
11/25/2002
43
4.17 TYAN THUNDER i860
THUNDER i860 (S2603)
THUNDER i860 HOMEPAGE
PERFORMANCE RATING:
3 streams YUV uncompressed
TESTED CONFIGURATION:
+Dual Xeon 1.7GHz 400MHz FSB
+512 MB PC 800 RDRAM
+ATI Radeon VE 32MB VGA
+Adaptec 29160 SCSI host adapter BIOS
v2.55.0
+Adaptec 39160 Dual Channel SCSI host
adapter
+Qlogic Dual Channel SCSI QLA12160 Host
Adapter
+IWILL DU3160 Dual Channel SCSI Host
Adapter(Dual Channel external connection
requires an additional internal to external
adapter cable.)
+ATTO UL3D Dual Channel SCSI adapter
+Integrated
Intel® 82550EY LAN controller
+8 Quantum Atlas 10K 9WLS Ultra160m 9 GB
drives
SLOT ASSIGNMENTS:
AGP : ATI RADEON VE VGA
PCI32-3: Empty
PCI32-2: Empty
PCI32-1: Empty
PCI64-2: Targa 3000
PCI64-1: ATTO UL3D
Note: PCI32-3 is closest to AGP slot
FEATURES AND SPECIFICATIONS:
Form Factor:
Extended ATX footprint (13" x 12", 330.2mm x 304.8mm)
Supported Processors:
Dual PGA370 ZIF sockets
Supports two Intel Pentium III processors (FC-PGA)
Onboard VRMs (VRM 8.4 spec)
Front-Side Bus support for 100MHz and 133
Memory Type:
Memory Expansion Card (MEC) design
Eight 184-pin RIMM sockets
Supports up to 4GB of PC800 Rambus memory
Chipset:
Intel® 860 chipset
82860 North Bridge, 82801BA I/O Controller