TARGA 3000 Configuration Cookbook
11/25/2002
46
4.19 Intel D845BG
Intel D845BG
D845BG Homepage
PERFORMANCE RATING:
2 Uncompressed YUV Streams
TESTED CONFIGURATION:
1x P4 2.0A GHz 478 PIN FCPGA
2x 256MB DDR 266 Memory
1x 40GB IBM ATA100 7200 RPM System
Drive
Builtin Intel 10/100 Network Adapter
1x AHA 39160 U160 SCSI controller
8x Seagate ST318452LC in JBOD Chassis
1x Matrox G550 Dual Head 32MB
Windows 2000 Professional SP2,
DirectX8.0a
Adobe Premiere 6.01
SLOT ASSIGNMENTS:
AGP: Matrox G550 AGP
PCI32-6: AHA-39160
PCI32-5: Empty
PCI32-4: Empty
PCI32-3: Empty
PCI32-2: TARGA 3000
PCI32-1: Empty
CONFIGURATION NOTES:
Mainboard requires P4 power supply 300W
or better.
Under Windows 2000, Intel INF installer
version 3.20 or higher needed.
For optimum IDE transfer, use Intel’s
UltraATA driver version 6.20 or higher.
Tested BIOS Rev.
PT84510A.86A.0024.P05
FEATURES AND SPECIFICATIONS
Form Factor:
ATX
Supported Processors:
Intel 478-pin Pentium 4 (Willamette/Northwood) FC-PGA2,
1.3-2.0GHz+
Memory Type:
DDR266 DRAM Addressable to 2GB
Chipset:
Intel 845B Chipset
I/O Expansion Slots:
6 32-bit, 33 MHz PCI bus mastering slots
1 4xAGP
1 CNR
Integrated Devices:
Dual Ultra DMA (UDMA/100MB/s) Burst data transfer rate
supports UDMA Mode 5, PIO Mode 4, ATAPI
AC97' Audio (OEM optional)
4 USB (Universal Serial Bus) ports
PS/2 keyboard and PS/2 mous connectors
2 fast UART 16550 compatible serial ports
1 ECP/EPP parallel port
1 Infrared port
1 floppy port
Chassis Compatibility:
Standard ATX
To Next Page
Loading...
Need help?
General
