Pinnacle Systems, Inc. TARGA 3000 Cookbook

TARGA 3000 Configuration Cookbook
11/25/2002 41
4.15 Intel D845WN
Intel D845WN
D845WN Homepage
PERFORMANCE RATING:
2 Uncompressed YUV Streams
TESTED CONFIGURATION:
1x P4 1.7GHz 478 PIN FCPGA
2x 256MB PC133 SDRAM
1x 40GB Maxtor ATA100 7200 RPM
System Drive
1x AHA 29160 U160 SCSI controller
8x Seagate ST318452LC in JBOD Chassis
1x Matrox G550 Dual Head 32MB
1x 3Com Elink III 10/100 Network Adapter
Windows 2000 Professional SP2,
DirectX8.0a
Adobe Premiere 6.01
SLOT ASSIGNMENTS:
AGP: Matrox G550 AGP
PCI32-6: AHA-29160
PCI32-5: 3COM Elink3 10/100 Network
PCI32-4: Empty
PCI32-3: Empty
PCI32-2: TARGA 3000
PCI32-1: Empty
CONFIGURATION NOTES:
Mainboard requires P4 power supply 300W
or better.
Under Windows 2000, Intel INF installer
version 3.20 or higher needed.
For optimum IDE transfer, use Intel’s
UltraATA driver version 6.20 or higher.
FEATURES AND SPECIFICATIONS
Form Factor:
ATX
Supported Processors:
Intel 478-pin Pentium 4 (Willamette/Northwood) FC-PGA2,
1.3-2.0GHz+
Memory Type:
PC133 SDRAM addressable to 3GB
Chipset:
Intel 845 Chipset
I/O Expansion Slots:
6 32-bit, 33 MHz PCI bus mastering slots
1 4xAGP
1 CNR
Integrated Devices:
Dual Ultra DMA (UDMA/100MB/s) Burst data transfer rate
supports UDMA Mode 5, PIO Mode 4, ATAPI
AC97' Audio (OEM optional)
4 USB (Universal Serial Bus) ports
PS/2 keyboard and PS/2 mous connectors
2 fast UART 16550 compatible serial ports
1 ECP/EPP parallel port
1 Infrared port
1 floppy port
Chassis Compatibility:
Standard ATX

Pinnacle Systems, Inc. TARGA 3000 Specifications

General

Brand	Pinnacle Systems, Inc.
Model	TARGA 3000
Category	Computer Hardware
Language	English