TARGA 3000 Configuration Cookbook
11/25/2002
44
CONFIGURATION NOTES:
Use PCILOCK boot option when running under
Windows NT 4.0
Busmaster must be enabled in all PCI Slots (by
default, busmaster is disabled in all PCI slots.)
Please consult the user manual on how to enable
busmaster in the BIOS.
Hub, 82802AB Firmware Hub and 82806AA
PCI 64 Hub
I/O Expansion Slots:
One AGP Pro slot supports 2x/4x modes
Two 64-bit / 66MHz (3.3-volt) PCI slots
Three 32-bit / 33MHz (5.0-volt) PCI slots
Integrated Devices:
LSI Symbios 53C1010R controller
Dual-channel Ultra160 SCSI support 160MBps maximum data
throughput per channel
Intel® 82550EY LAN controller
Analog Devices AD1885 chipset AC'97 codec
Two Ultra DMA (UDMA/100) bus master/EIDE
channels that support an IDE drive data transfer rate of 100 MHz
4 USB (Universal Serial Bus) ports (two onboard connectors and two
headers)
PS/2 keyboard and PS/2 mouse connectors
Two fast UART 16550 compatible serial ports
One ECP/EPP parallel port
One floppy port
Chassis Compatibility:
Extended ATX chassis
To Next Page
Loading...
Need help?
General
