EasyManuals Logo

Pioneer PDP-507XA User Manual

Pioneer PDP-507XA
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #113 background imageLoading...
Page #113 background image
PDP-507XD
113
5678
56
7
8
C
D
F
A
B
E
7. ADJUSTMENT
7.1 PARTS CHANGE OF NOTES
7.2 ADJUSTMENT REQUIRED WHEN THE SET IS REPAIRED OR REPLACED
1. At shipment, the unit is adjusted to its best conditions. Normally, it is not necessary to readjust even if an assembly is replaced. If the
adjustment is shifted or if it becomes necessary to readjust because of part replacement, etc., perform the adjustment as described below.
2. Any value changed in Service/Factory mode will be stored in memory as soon as it is changed. Before readjustment, take note of the
original values for reference in case you need to restore the original settings.
3. Use a stable AC power supply.
50Y MAIN DRIVE Assy No adjustment required
50Y SUB DRIVE Assy No adjustment required
TANSHI Assy No adjustment required
R07 DT Assy (PDP-507XD only) No adjustment required
POWER SUPPLY Unit
50 DIGITAL Assy
50X MAIN DRIVE Assy No adjustment required
Refer to "7.7 HOW TO CLEAR HISTORY DATA".
50X SUB DRIVE Assy No adjustment required
MAIN Assy Switching to SR+ from RS-232C
Service Panel Assy
Refer to "7.5
ADJUSTMENTS WHEN THE SERVICE
PANEL ASSY IS REPLACED" and "7.7 HOW TO
CLEAR HISTORY DATA".
Writing of backup data is required.
Refer to the "7.4 BACKUP WHEN THE PANEL UNIT
IS ADJUSTED. "
SENSOR Assy
Writing of backup data is required.
Refer to the "7.4 BACKUP WHEN THE PANEL UNIT
IS ADJUSTED. "
When any of the following assemblies is replaced

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Pioneer PDP-507XA and is the answer not in the manual?

Pioneer PDP-507XA Specifications

General IconGeneral
3D-
Depth115 mm
Width1224 mm
Height717 mm
Weight34100 g
Tuner typeAnalog
Pixel pitch- mm
Smart modesEnergy saving
Aspect ratio16:9
Product colorBlack
LED indicatorsY, Power
Noise reductionYes
RMS rated power26 W
AC input voltage220 - 240 V
Display diagonal50 \
Channels quantity99 channels
AC input frequency50 - 60 Hz
Display brightness1100 cd/m²
Display resolution1365 x 768 pixels
Display technologyPlasma
Number of speakers2
Teletext standardsTop-text
SCART ports quantity3
Supported video modes1080p
USB 2.0 ports quantity0
Contrast ratio (typical)4000:1
Annual energy consumption- kWh
Display diagonal (metric)127 cm
Analog signal format systemNTSC, NTSC 3.58, NTSC 4.43, PAL, PAL 60, PAL BG, PAL DK, PAL I, SECAM, SECAM B/G, SECAM D/K, SECAM L
Power consumption (standby)0.3 W
Power consumption (typical)341 W
Sound enhancement technologyFOCUS, SRS, TruBass
Supported graphics resolutions1024 x 768 (XGA), 1280 x 768 (WXGA), 640 x 480 (VGA), 800 x 600 (SVGA)
Component video (YPbPr/YCbCr) in1
On Screen Display (OSD) languagesCZE, DAN, DEU, DUT, ENG, ESP, FIN, FRE, GRE, ITA, NOR, POL, POR, RUS, SWE, TUR

Related product manuals