Pipistrel Sinus User Manual

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Take the metal spouts you removed earlier and sand the ends lightly with sandpaper.
 Now mount them back onto the crankcase, BUT BE SURE TO SWITCH METAL SPOUT 2
WITH METAL SPOUT 4. Therefore, the spout that was located above cylinder 4 before
you removed it, should now be placed above cylinder 2. Apply blue Loctite 243.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 130 of 267

Pipistrel Sinus Specifications

General

Manufacturer	Pipistrel
Seats	2
Rate of climb	5.5 m/s (1, 080 ft/min)
Ballistic parachute rescue system	Optional
Engine	Rotax 912
Type	Motor glider