Pipistrel Sinus User Manual

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Fit the 380mm hose to the fuel pump's inner spout using a 12mm hose clamp. Attach one end of
920mm hose to the fuel pumps outer spout. Feed the other end of the 920mm hose between cylinder
heads 1 and 2. Leave it there for future use.
 Clamp the distributor down using ties, but place a piece of foam underneath first.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 142 of 267

Pipistrel Sinus Specifications

General

Manufacturer	Pipistrel
Seats	2
Rate of climb	5.5 m/s (1, 080 ft/min)
Ballistic parachute rescue system	Optional
Engine	Rotax 912
Type	Motor glider