Pipistrel Sinus - Page 161

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Now install all four exhaust gas temperature sensors. Apply Antiseize. To keep track of
which wires are which, you can number the wires with the corresponding cylinder head.
 Organize the wiring for all sensors; exhaust gas temperature sensors, oil temperature
sensor, oil pressure sensor and cylinder head temperature sensor. The goal is to run the
wires towards the back of the motor along the groove beside the crankcase and behind
the cylinder heads.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 161 of 267