Pipistrel Sinus - Page 211

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Grind out the end flap hole with a Dremel. This is used to secure the whole flaperon to
the aircraft. Also open up the other holes on the rest of the wing a few mm on the bottom
side only to allow for more flap movement in the downward position.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 211 of 267