Pipistrel Sinus User Manual

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 Now lets prepare the lower hole. Begin by bending a cable outer as shown
in the photo below. Hold a lighter to the cable outer so that the bend will
hold.
 Fit the cable with an insert. The picture below shows how the insert-cable
outer is to be mounted.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 64 of 267

Pipistrel Sinus Specifications

General

Manufacturer	Pipistrel
Seats	2
Rate of climb	5.5 m/s (1, 080 ft/min)
Ballistic parachute rescue system	Optional
Engine	Rotax 912
Type	Motor glider