Pipistrel Sinus - Page 7

K i t M a n u a l f o r P i p i s t r e l S i n u s a n d V i r u s A i r c r a f t
 The sections highlighted below need a little extra material taken off the inside edge to
make sure the windscreen seats perfectly. Be sure to do both sides.
 With a marker pen, mark the center of the fuselage halves above the firewall section.
Look for the strip of raised plastic on the fuselages surface, which is a result of the
fuselages manufacturing process. This will assist you in finding the center position, which
in turn will be used to locate the windscreen brace.
http://www.pipistrel.si © Pipistrel Release March 2009 © Page 7 of 267