Setting the default Job on the Run Mail screen
1. Ensure the job you want to make the default is open and active on the Run Mail screen.
2. Select the Options button.
3. Select Save as default job. The selected job appears on the Default jobs tab. The previous
default job appears on a new tab.
Setting the default job on the Jobs screen
1. Select the Jobs button in the Mailing tile on the Home screen.
2. Select the job you want to make the default.
3. Select Options then select Make this job the default job.The system gives the selected job the
default icon. The job also appears on the Default jobs tab in the Run Mail application.
4. Select OK when done.
Renaming a job
1. Select the Open a job tab from within the Run Mail screen, or select the Jobs button in the Mailing
tile on the Home screen.
2. Select the job you want to rename.
3. Select Options then select Rename job.
4. Type in the new job name.
5. Select OKtwice when done.
6. Select the Home button to return to the Home screen.
Reloading a Job
The Reload job option allows you to reset an edited or modified job to its original state. Use this option to
discard changes you have made to a job.
On the run mail screen:
Using jobs
Pitney Bowes Operator Guide February,2018 Page 50 of 349
To Next Page
Loading...
