Job options
The Options button at the bottom of the Jobs screen allows you to manage and edit your jobs. Select the
Options button and choose from one of the following.
l Rename job - Select this option if you want to rename the selected job. The job must be closed on
the Run Mail screen before you rename it.
l Duplicate job - Select this option if you want to create a copy of the selected job.
l Delete job - Select this option if you want to delete the selected job. The default job, library jobs,
and jobs that have been locked cannot be deleted.
l Make this job the default job - Select this option if you want to make the selected job the default job.
Creating a duplicate job
1. Select the Open a job tab on the Run Mail screen, or select the Jobs button in the Mailing tile on
the Home screen.
2. Select the job you want to duplicate.
3. Select Options then select Duplicate job.The system creates a duplicate job. This job appears in
the Job list below the original, with the word "copy" after the name.
4. Select OK when done.
Setting the default job
The default job is the most commonly used job on your mailing system. It is automatically selected
whenever you restart your mailing system. You can change the default job by editing it and then saving
the changes, or you can open a different job and save that job as the default job.
Note:
Postage Correction and Date Correction jobs cannot be set as the default job.
Using jobs
Pitney Bowes Operator Guide February,2018 Page 49 of 349
To Next Page
Loading...
