5. Select Start to begin feeding and sealing envelopes.
6. If you want to save this job, select Save as.
7. Type in the job name and select OK.
Counting Mail without Printing Postage
If your system uses accounting, you can create a job to count mail without printing postage. The piece
count will be included in accounting reports.
If you have already created a count only job, open the job and begin running mail.
1. Select the Run Mail button in the Mailing tile on the Home screen.
2. Select the Options button.
3. Select Create new job....
4. Select Count Only.
5. Select OK. The job appears in a new job tab.
6. Select the appropriate counter and then select OK.
l Total - Count only: total number of pieces for the current job.
l Resettable - Count only: the total number of pieces run since you reset the counter.
7. Select an account.
8. If necessary, select a surcharge.
9. Select Start to begin feeding and counting envelopes.
10. If you want to save this job, select Save as.
11. Enter the job name and select OK.
Using jobs
Pitney Bowes Operator Guide February,2018 Page 58 of 349
To Next Page
Loading...
