8. Load envelopes and press the Start button, or if printing to tape, press the Tape button.
More information:
l If the message "Optimizing print quality..." displays, the system may be performing normal
printer maintenance. Once complete, it will start printing.
l If you have not loaded the envelopes onto the feeder, or if you need to add more mail to the
feeder, the Run Mail screen shows the message "Waiting for Envelope".
l If after a certain time you have not loaded envelopes, the feeder will stop and the message
"Stopping..." is displayed.
9. As the system processes the mail pieces, it keeps track of the number of pieces and the total
postage amount. To check or clear the piece count, select the Counter button at the bottom of the
Run Mail screen.
10. If an envelope or tape jams during printing, the system stops and displays the location of the jam.
Once you clear the jam you have to option of printing another envelope or tape.
11. To save any changes you have made to this job, select Save or Save as on the top of the Run Mail
screen.
Running mail
Pitney Bowes Operator Guide February,2018 Page 78 of 349
To Next Page
Loading...
