HybridDigitalVideoRecorder
HDVRseries
18
Chapter 3. Connecting to the HDVR
There are various ways you can connect to the HDVR and below are the suggested methods
for different network setups:
The HDVR is placed in a network with a DHCP server: Connect to the HDVR by using “HDVR
Search Tool” Utility.
The HDVR is placed in a network without DHCP server (or you are connecting to it directly):
Access HDVR with its default IP (192.168.0.20).
3.1 Using Search Tool Utility
If the HDVR is placed in a corporate network or a local area network where a DHCP server is
already presented, please install the “Search Tool” utility from the bundled CD disk.
To begin, launch the “Search Tool” utility from the CD and proceed with the installation.
To Next Page
Loading...
