HybridDigitalVideoRecorder
HDVRseries
46
Hybrid mode: It only enables video loss function at the local side.
Video Loss in Hybrid (HVR) Mode
Video Loss in Full Digital (NVR) Mode
Picture 5.9 Video Loss
Set method: refer to Motion Detection in Chapter 5.3.1.
5.3.4 Alarm Input
When the equipment obtains the external alarm signal, the alarm function is turned on.
Alarm input is the same between hybrid mode and full digital mode when the function is
enabled. When it is set normal, it only needs to connect alarm sensor to alarm input port on the
To Next Page
Loading...
Need help?
General
