Planet HDVR-430 - 5.2 Record Functions

 HybridDigitalVideoRecorder
HDVRseries


37
Hard disk
information
Display hard disk capability and recording time
BPS Display code stream information
Log information Search and clear log information according to log types
System
information
Version Display firmware, MAC address information, etc.
Logout Logout, shut down or reboot
5.2 Record
Operations related to record includes Recording, Playback, Backup and Screen Shot (only for
hybrid mode and full analog mode).
5.2.1 Record Configuration
Set the recording parameters in the surveillance channel. The system sets 24 hours
consecutive recording in the first startup. You can enter [main menu]> [recording function]>
[recording setup] to set.
There is at least one read-write hard disk (refer to chapter 5.5.1).
Picture 5.1 Record Configuration
Channel
Choose the corresponding channel number to set the channel.
Choose the all option to set the entire channels.
Redundancy
Choose the redundancy function option to implement the file
double backup function. Double backup is writing the video
files in two hard disks. When you do the double backup, make
sure that there are two hard disks installed. One is read-write
disk and the other is redundant disk. (refer to 5.5.1)
Length
Set the time length of each video file. 60 minutes is default
value.