HybridDigitalVideoRecorder
HDVRseries
84
5.6.1 HDD Info
Display the hard disk state and it lists hard disk type, overall capability, residual capability, the
recording time, etc.
Picture 5.55 HDD Info
Tips: Symbol “○” means that the hard disk is normal; symbol “X” means that the hard disk is
broken down; symbol “-” means that there is no hard disk. If you need to replace the damaged
hard disk, you must shut down the DVR, take out all the damaged hard disks and then install
new ones.
Symbol “*” behind serial number means the current working disk such as 1*. If the
corresponding disk is damaged, the information will show “？”.
To Next Page
Loading...
