HybridDigitalVideoRecorder
HDVRseries
32
8. Page Shift
Refer to Picture 4.10; click the Page Shift button to leave for auxiliary function control interface
as Picture 4.14 shows the setup of the auxiliary function where auxiliary number corresponds
to auxiliary switch on the decoder.
Picture 4.14 Auxiliary Function Control
Intuitive Auxiliary
Operation
Choose auxiliary equipment to select Open or Close button to
switch control.
Auxiliary Number
The operation of the corresponding auxiliary switch according
to PTZ agreement.
Page Shift
Refer to Picture 4.14; click the Page Shift button to enter PTZ
Main Menu interface. The menu itself can be controlled by
menu control buttons.
4.3.6 Color Setting
Color setting is only applied for hybrid (HVR) / full analog (DVR) mode and can be configured
in analog channel. You can adjust the selective image parameters according to your
requirement (current channel for single window display and cursor place for multi-window
display). Through desktop shortcut menu, you are able to enter the interface. The image
parameters include tonality, brightness, contrast, saturation. Besides, you can set different
parameters at different time sections.
Picture 4.15 Color Setting
To Next Page
Loading...
Need help?
General
