HybridDigitalVideoRecorder
HDVRseries
38
Pre-record
Record 1-30 seconds before the action. (time length is decided
by the code stream)
Record Mode
Schedule: Record according to the set video type (common,
detection and alarm) and time section.
Manual: Click the button and the channel is recording no
matter what state it is in.
Stop: Click the stop button and the channel stops recording no
matter what state it is in.
Period
Set the time section of common recording, The recording will
start only in the set range.
Record Type
Set recording type: regular, detection or alarm.
Regular
Perform the regular recording in the set time section. The video
file type is “R”.
Detect
Trigger the “motion detect”, “camera mask” or “video loss”
signal. When the above alarm is set as opening recording, the
“detection recording” state is on. The video file type is “M”.
Alarm
Trigger the external alarm signal in the set time section. When
the above alarm is set as opening recording, the “detection
recording” state is on. The video file type is “A”.
Refer to chapter 5.3 to set corresponding alarm function.
5.2.2 Playback
Refer to chapter 4.3.2.
To Next Page
Loading...
Need help?
General
