HybridDigitalVideoRecorder
HDVRseries
33
4.3.7 Output Adjust
In hybrid mode, the output adjust function supports black vertical and black horizontal
adjustment; in full digital mode, the function does not support the adjustment below. The
function allows you to adjust TV output area parameters. You can go to the setup interface via
desktop shortcut menu or enter [main menu]> [management tools]> [Output adjust].
Hybrid Mode Full Digital Mode
Picture 4.16 Output Adjust
The black vertical and horizontal lines at output adjust can affect analog
channel in the hybrid mode.
4.3.8 Logout
In logout setup interface, it comes with logout, shutdown and reboot functions. You can use the
desktop shortcut menu or enter [main menu].
Picture 4.17 Logout, Shutdown, Reboot
Logout
Press to log out; password is needed to re-enter.
Shutdown
Press to turn off the system after three seconds. Cancel
midway is of no effect.
To Next Page
Loading...
Need help?
General
