Planet VDR-300NU - Routing

User Manual of VDR-300NU
5.2.9 Routing
 Default Gateway
Choose Advanced Setup > Routing > Default Gateway and the following page appears.
Figure 5-2-61
On this page, you can modify the default gateway settings.
Select a proper WAN interface in the drop-down list of Selected WAN Interface as the system default
gateway. After finishing setting, click Apply/Save to save and apply the settings.
 Static Route
Choose Advanced Setup > Routing > Static Route and the following page appears.
Figure 5-2-62
In this page, you can add or remove a static routing rule. Click the Add button to display the following
page.
74