User Manual of VDR-300NU
5.2.20 IPSec
Choose Advanced Setup > IPSec and the following page appears.
Figure 5-2-85
On this page, you can add or remove the IPSec tunnel connections. Click the Add button to display the
following page.
Figure 5-2-86
On this page, set the parameters such as the IPSec connection name, tunnel mode, and remote IPSec
gateway address.
If you need to configure the advanced settings of this IPSec tunnel connection, please click the Show
Advanced Settings button to display the other parameters.
After finishing setting, click Apply/Save to save and apply the settings.
90
To Next Page
Loading...
