Planet VDR-300NU - Page 76

User Manual of VDR-300NU
On this page, you can add or remove a static policy rule. Click the Add button to display the following
page.
Figure 5-2-65
On this page, enter the policy name, source IP and default gateway, and select the physical LAN port and
interface. After finishing setting, click Apply/Save to save and apply the settings.
 RIP
Choose Advanced Setup > Routing > RIP and the following page appears.
Figure 5-2-66
On this page, if you want to configure an individual interface, select the desired RIP version and operation,
and then select the Enabled checkbox for the interface.
After finishing setting, click Apply/Save to save and apply the settings.
76