Planet WNAP-7320 User Manual

User Manual of WNAP-7320
-16-
Step 3. Take out the power cord and PoE injector, plug the power cord into the DC port and plug the other side
of the RJ-45 cable in the Step 2 into the POE port of the PoE injector.
Figure 3-3
Step 4. Slide the cover back to seal the bottom of the WNAP-7320 to finish the installation.
Figure 3-4

Planet WNAP-7320 Specifications

General

Brand	Planet
Model	WNAP-7320
Category	Wireless Access Point
Language	English