User Manual of WNAP-7320
-77-
5.6.2 Profile Settings
In Client Bridge and Client Router operation modes, please go to “Advanced-> Wireless Settings-> Profile
Settings” to configure the wireless client function to connect with the wireless AP.
Figure 5-6-5
The page includes the following fields:
Object Description
Profile Name
Fill out the Root AP’s MAC Address enable it to connect to the Root
AP using WDS.
Network Type
Set the Network Type that you would like to use.
Infrastructure:
Infrastructure networks consist of the networked devices and the
wireless access point or wireless router. Each device must connect to
the access point before having access to other computers on the
network.
Ad-hoc:
In an ad hoc network, each device's network adapter directly
communicates with other devices.
SSID
It is the wireless network name of Root AP.
To Next Page
Loading...
Need help?
General
