User Manual of WNAP-7320
-67-
5.5.4 Advanced Routing
Figure 5-5-12
The page includes the following fields:
Object Description
Destination
The IP address of packets that can be routed.
Type
Defines the type of destination. ( Host: Signal IP address / Net: Portion
of Network )
Gateway
Defines the packets destination next hop
Interface
Select interface to which a static routing subnet is to be applied
Comment
Help identify the routing
Dynamic Routing
Protocol
Enable or disable the RIP (Routing Information Protocol) for the
WAN or LAN interface.
It supports RIP v1 and v2.
To Next Page
Loading...
Need help?
General
