Planet XGS3-24042 - Page 300

37-6
ipv6 rip aggregate-address
X:X::X:X/M
no ipv6 rip aggregate-address
X:X::X:X/M
To configure or delete IPv6 aggregation route
on interface.
(3) Display IPv6 aggregation route information
Command
Explanation
Admin Mode and Configuration Mode
show ipv6 rip aggregate
To display IPv6 aggregation route information,
such as aggregation interface, metric, numbers
of aggregation route, times of aggregation.
6. Configure redistribution of OSPFv3 routing to RIPng
(1)Enable redistribution of OSPFv3 routing to RIPng
Command
Explanation
Router IPv6 RIP Configuration Mode
redistribute ospf [<process-tag>]
[metric<value>] [route-map<word>]
no redistribute ospf [<process-tag>]
To enable or disable redistribution of OSPFv3
routing for RIPng.
(2)Display and debug the information about configuration of redistribution of OSPFv3 routing to
RIPng
Command
Explanation
Admin Configuration Mode
show ipv6 rip redistribute
To display RIPng routing which is
redistributed from other routing protocols.
Admin Mode
debug ipv6 rip redistribute message
send
no debug ipv6 rip redistribute
message send
debug ipv6 rip redistribute route
receive
no debug ipv6 rip redistribute route
receive
To enable or disable debugging messages
sent by RIPng for redistribution of OSPFv3
routing.
To enable or disable debugging route
messages received from NSM.