A.4.5 Maintenance protocol
Unit serial number:
Prefilter
Date Name
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
….….….….….….….….….….….…. ….….….….….….….….….….….….
A.4.6 Filter disposal
Pre filters are manufactured from non-toxic materials.
Filters are not re-usable, cleaning used filters is not recommended.
Disposal of the used filters depends on the material deposited on them. For
more information, see the following table.
Deposit EWC listing* Comment
Non-hazardous 15 02 03 Can be disposed of as non-hazardous waste.
Hazardous 15 02 02 M The type of hazard needs to be identified and the
associated risks defined. The thresholds for these risks
can then be compared with the amount of material in the
filters to see if they fall into the hazardous category. If so,
the filters will need to be disposed of in line with the local/
national regulations.
* European waste catalogue
A.5 Troubleshooting
In the unlikely event of a problem with your extractor please contact your
local representative or:
Planmeca
Asentajankatu 6
FIN-00880 Helsinki
FINLAND
A.6 Technical specifications
Unit iVAC eco+
Capacity 260 m³/hr (9182 ft³/hr)
Size H 750mm x D 460mm x W 440mm (30 x 18 x 17
in.)
Weight 30 kg (66 lbs)
Appendix A: Extraction system (optional)
104 Planmeca PlanMill 60 S User's manual
To Next Page
Loading...
