Planmeca PlanMill 60 S - General; Cleaning and Maintenance

13.5.2 General
The
Settings > General menu shows the inside temperature of the milling
unit. It also shows whether the milling unit's protective door (= working room
door) is unlocked or locked, and whether the collet is closed (tool is in collet)
or open (no tool in collet).
13.5.3 Cleaning and maintenance
In the
Settings > Cleaning and maintenance menu you can start wet
cleaning, dry cleaning and spindle maintenance processes. The menu also
shows you the time for the next annual maintenance and when coolant
lubricant should be maintenanced, i.e. changed.
Cleaning and maintenance
• Execute dry cleaning
Machine starts dry cleaning program using air and suction.
• Execute wet cleaning
Machine starts wet cleaning using coolant.
• Execute spindle maintenace
Machine drives spindle into a position that allows executing maintenance
for spindle/collet.
13 Control software
User's manual Planmeca PlanMill 60 S 45