Planmeca PlanMill 60 S - Technical Information; Technical Specifications

21 Technical information
21.1 Technical specifications
Manufacturer
Manufacturer imes-icore® GmbH
Address Im Leibolzgraben 16
D-36132 Eiterfeld
Germany
Telephone +49 (0) 6672 898-228
Email info@imes-icore.de
Internet http://www.imes-icore.de
Distributor
Distributor Planmeca Oy
Address Asentajankatu 6
00880 Helsinki
Finland
Telephone +358 (0) 20 779 5500
Internet https://www.planmeca.com/
Machine
Specification Value
Dimensions (W x H x D) 422 x 644 x 556 mm
(16.6 x 25.4 x 21.9 inches)
Weight (gross) ~ 75 kg (~ 165 lbs)
Drive type High-torque stepper motors
Control Stepper motor control IME 481
Protective door Flap door downwards (vertical)
Guides Precision steel guides in X, Y, Z axis
Max. dimensions of the workpieces ØH 94 x 30 mm (3.7 x 1.2 inches)
LWH 40 x 20 x 20 mm (1.6 x 0.8 x 0.8 inches)
Tool changer 10-slot direct tool changer
Cooling lubricant tank 3.0 litres
Maximum installation height 2000 metres (1.25 miles) above sea level
Maximum setting angle A-axis: 30° / B-axis: 25°
Monitor 10" touchscreen
Machining spindle
Specification Value
Tool change Electric direct tool changer
21 Technical information
User's manual Planmeca PlanMill 60 S 91