10 Extraction system
WARNING
The extraction unit provided by Planmeca is intended solely for the
extraction of DRY milling dust. Do not extract any coolant lubricant with
the extractor provided by Planmeca. This may lead to damage or even
destruction of the extraction unit.
An extraction system is a type of vacuum that vacuums the dry milling dust
from the milling unit when the dry milling technique is used. It is located in
close vicinity to the milling unit and must be connected to the milling unit
every time before dry milling is performed as the fine dust generated by dry
milling is harmful to health.
10 Extraction system
User's manual Planmeca PlanMill 60 S 35
To Next Page
Loading...
