The
Settings
>
Wi-fi
menu shows the network name, network state and MAC
address of your milling unit. It also shows the available Wi-fi networks and
lets you connect to a Wi-fi network.
13.5.10 Network drives
The
Settings
>
Network drives
menu lets you connect to a network drive and
add a network drive.
13.5.11 Jobs
The
Settings
>
Jobs
menu lets you define the following parameters for job
import:
• archive or delete milling job after completion
• for how long is the milling job archived (default 30 days)
• should deleted milling job also be deleted from CAM PC
• activate/deactivate different types of holders
13 Control software
User's manual Planmeca PlanMill 60 S 49
To Next Page
Loading...
