Chapter A - GENERAL & TECHNICAL DATA
A-4 Planmeca Proline EC X-ray unit
TECHNICAL SPECIFICATIONS
Technical Manual
Mechanical data
Weight Panoramic:108 kg / 238 lbs
Pan/ceph 126 kg / 278 lbs
Dimensions (HxDxW) 2200x930x890 mm, 86.6x36.6x35 inch
Color RAL 9002
Environmental requirements
Ambient temperature Operating +5°C to +40°C
Storage -10°C to +50°C (film-based X-ray)
0°C to +50°C (Dimax3 digital X-ray system)
Humidity 25% - 75%
Dimax3 digital X-ray system
CCD pixel size 33 µm
Image pixel size 130 µm normal resolution
99 µm enhanced resolution
Image size 2200x1000 pixels normal resolution
2940x1360 pixels enhanced resolution
Sensor active area size Pan 9 x 136 mm
Ceph 9 x 230 mm
Image field Panoramic 14 x 30 cm (5.5 x 12 in.)
Cephalometric 22.5 x 30 cm (9 x 12 in.)
External mains fuse recommendation
The recommendation for the external mains fuses are:
• units with 100 - 132 V~ voltage setting: 16A, time lag
• units with 180 - 240 V~ voltage setting: 8A, time lag
No other equipment should be connected to the same fused mains line as the x-ray unit. In
some countries an additional external fault current guard is also required.
Manufacturer
PLANMECA Oy, Asentajankatu 6, 00880 Helsinki, FINLAND
phone: +358-20-7795 500
To Next Page
Loading...
