Chapter E - DIMAX3 DIGITAL SYSTEM ADJUSTMENT
E-38 Planmeca Proline EC X-ray unit
OTHER PANORAMIC MODE ADJUSTMENTS
Technical Manual
6 OTHER PANORAMIC MODE ADJUSTMENTS
The following adjustments are performed according to the instructions given in chapter
“ADJUSTMENT & CALIBRATION” on page D-1.
• MECHANICAL ADJUSTMENT OR THE ROTATIONAL PART, refer to section
“MECHANICAL ADJUSTMENT OF THE ROTATIONAL PART” on page D-19.
• TIME SETTING, refer to section “SETTING THE CLOCK” on page D-25.
• EXPOSURE WARNING SIGNAL ADJUSTMENT, refer to section “EXPOSURE WARN-
ING SIGNAL ADJUSTMENT” on page D-26.
To Next Page
Loading...
