Plockmatic BLM 35 - Index

INDEX
A
Access to machine 81
Adjustment of Bleed Trimmer registration angle (parallel cut) 91
Air Separation 47
Alive logo 24
Auto Rotate 58
AUTO sheet size 43
Auto trimming 43
B
Basics 33
Basic settings 42
Belt stacker 71
Belt Stacker 30, 37
Belt stacker fault codes 77
Best practices for the SD-350/SD-500 system 93
Bleed Trimmer - Asymmetric Side Trim 52
Bleed Trimmer - Cover Adjust 52
Booklet Maker 13, 64
Booklet Maker fault codes 74
BST4000-1 Belt Stacker Module 100
C
Cables, plugs and jumpers 105
Change left/right staple cartridge(s) 34
Changing settings 42
Check left/right stapler 35
Cleaning feed belts 83
Cleaning feed rollers and paper separator pad 82
Cleaning of creaser tools (2x) 90
Cleaning the xing rollers (3x) 86
Cleaning the paper path sensors (5x) 88
Cleaning the paper path transportation nip rollers (6x) 85
Cleaning the registration cross roller (4x) 87
Cleaning the rotator rollers (2x) 88
Clearing Misfeed(s) 61
Control panel 16
Cover 46
Cover Feeder 25, 35, 67
Cover Feeder fault codes 75
Crease 50
Crease Mode 50
Crease position 50
Custom booklet size 44
Customizing settings 45
D
Declaration of Conformity 102
Do’s And Don’ts 79
Double Sheet Detection 47
E
Emptying the trim bin 36
F
Fault codes 73
Fine-tuning booklet appearance 51
Finished Booklet Size 43
Fold delay 57
Fold position 46
G
General fault codes 78
General safety 4
Guided Start 39
Guide To Components 13
H
Hand-feeding 53
Hand feed mode 53
Handling jobs 59
How to read this manual 3
I
Input Sheet Size 42
Introduction 3
J
Jobs 59
L
Language 56
Limitations of the SD-350/SD-500 system 94
Loading covers 35
M
Machine environment 80
Machine Specications 97
Maintaining Your Machines 82
Making Booklets 39
O
Off-line mode 53
Opening and handling stored Jobs 60
Options 19
P
Paper path light 56
Plockmatic Cover Feeder 99
Power connection 80
Pressure springs 84
Purge Cover 48
R
RCT fault codes 73
RCT Module 85
REMARKS 79
Rotate Crease Trim Module (option) 97
S
Safety during operation 4
Safety Information 4
Saving a Job 59
SD-BM350/500 Booklet Maker 98
Selecting BookFold pressure setting 49
Selecting standard paper sizes 42
Service mode 57
Set registration (ne adjustment) 51
Setting up Belt Stacker 37