69
5
[A]
Trimmer
Clearing misfeed(s)
1
Raise the rightmost side of the infeed roller shaft assembly (A).
2
Remove the misfed sheets in the infeed area.
3
After the misfed sheets are removed, place the infeed roller shaft assembly into
operating position.
Clearing misfeed in input area
The upper trimmer blade on the trimmer is protected by a knife protection plate that moves
away during the cutting stroke.
WARNING
Never put ngers or other body parts between the upper and lower trimmer knives.
infeed roller shaft assy. in normal position infeed roller shaft assy. lifted
To Next Page
Loading...
